光刻技术及其新进展

介绍了用于制作半导体集成电路的光刻工艺的概念、分类及发展过程，阐述了当前光刻工艺的主流，并重点介绍了极紫外光刻、X射线光刻、电子束光刻、离子束光刻、纳米图形转印等下一代光刻技术的特点及其面临的挑战。     

Decomposition of Time Series Dynamic Linear Models

This paper derives the admissible decompositions for a time series dynamic linear model, assuming only that the model is observable. The decompositions depend on factorizations of the characteristic polynomial of the state evolution matrix G into relatively prime factors. This generalizes the method of West (1997 ) which considers one decomposition in the particular case where G is diagonalizable. Conditions are derived for a decomposition to be independent. These results show that no autoregressive process of order d has an independent decomposition for any integer d . Two illustrations of this procedure are discussed in detail.     

海洋钻井液有机物添加剂生物降解性评价

随着海洋石油的勘探开发，钻井液有机添加剂不可避免地进入海洋．因此在海洋勘探开发过程中应选择环保性能好，即生物降解性能好的有机物添加剂。用累计耗氧量法测定了海洋钻井液有机添加剂的生物降解性，研究评价了有机添加剂的生物降解规律和机理，探讨了有机物生物降解性同其化学结构的内在联系，为海洋勘探开发过程中选择环保性能好的有机物添加剂提供理论依据。总结实验结果发现：淀粉类(如DFD-140和FI-E1等)最容易生物降解；其次是纤维素类(如MV-CMC等)和烯类单体聚合物(如PAM和PHP)；而沥青类、两性离子类则难以生物降解，有的甚至对生物降解起抑制作用。     

小容量机组保护监控一体化

以数字信号处理器(DSP)和复杂可编程逻辑器件(CPLD)为硬件平台,研制了新一代面向中、小型水电站的综合自动化模块.充分发挥MB40智能可编程逻辑控制器(iPLC)及MB100系列保护测控系统的技术优势,将小型水电站的保护装置做成模块插件,融入监控系统,降低了小型水电站自动化设备的成本,为推出真正意义上的面向小型水电站的"五合一"产品打下坚实的基础.     

DNS／GPS组合导航系统研究

本文阐述ＤＮＳ与ＧＰＳ组合导航的必要性、可行性及组合方法，给出了误差模型和卡尔曼滤波模型。选取观测量不同可有三种组合方式，通过模拟计算给出了相应曲线。当采用伪距及其变化率作为观测量时，其组合方式最佳，定位精度可达米级，航向精度可提高到０．２°。     

MOS晶体管的阈值电压不匹配特性

集成电路中器件的匹配性对于模拟电路和数字电路的设计有着很重要的影响,而现在重要的是还缺乏精确的器件匹配的模型。在模拟集成电路设计中,MOS管阈值电压的匹配特性对集成电路尤其是电流Ids的大小有着重要的影响。基于短沟道系列模型,MOS氧化层中的固定电荷和杂质原予服从泊松分布,分析了NMOS和PMOS器件不匹配的物理原因,并验证σVT/VT遵循与1/(?)成比例的结论。     

Integrated distributed intelligent system for process-control system design

In process-control system design, the Computer Aided Design (CAD) techniques have evolved a new generation of design techniques. This also paves the way for implementing Computer Integrated Manufacturing Systems (CIMS). However, the key issue to accomplishing the objectives in CAD is the automation of conceptual design. This paper first introduces the fundamentals of conceptual design for process-control system design. Then, a strategy to solve the problems in conceptual design is proposed. The associated system configuration and software implementation platform for developing intelligent systems for process control system design are presented. Finally, an application case is studied.     

Development and implementation of a NURBS curve motion interpolator

This paper deals with the issues of development and implementation of a real-time NURBS interpolator for a six-axis robot. Using an open-architecture controller system as a testbed, a real-time NURBS curve interpolator was developed, implemented and tested. Sample runs were conducted with the resulting trajectories measured in real-time during robot motion. The resulting trajectories are analyzed, discussed and compared with those from a commonly used point-to-point approximation technique. The real-time NURBS curve interpolator's feasibility, advantages and related issues are also discussed.     

建设资源节约型企业的实践

介绍了中国铝业贵州分公司在能源统计和管理、节能技术改造、资源综合利用和清洁生产方面所采取的措施和取得的效果。     

ψ(3770)精细扫描数据积分亮度的测量

工作在北京正负电子对撞机(BEPC)上的北京谱议(BES),于2003年12月在质心系能量从3.660到3.897 GeV区间内67个能量点上收集了数据,我们测量了此67个能量点数据样本的积分亮度.数据样本对应的总的积分亮度为(5550.96±13.56±108.24)nb-1.